Plumber Atlanta

A Complete Guide On How To Install A New Bathtub Drain

Here is a quick and easy instructions for installing a new bathtub drain. Regardless of whether you’re remodeling your bathroom or fixing a broken drain, this post will guide you through the necessary actions to guarantee a good installation. We can help you with everything from comprehending the many kinds of drain stoppers to knowing when to get professional assistance. Let’s get started and give your bathtub a new, useful drain.

Essential Tools and Materials

Ensure you have all the tools and materials needed before starting the process of installing a new bathtub drain. This planning guarantees a smooth procedure and guards against setbacks once you’re underway. Here is a complete list to help you:


Plunger: To clear the bathtub of any extra water before beginning the installation.

A screwdriver: is necessary to remove and detach the outdated drain components.

Adjustable Wrench: Tighten and loosen different nuts while installing a system.

Pipe Wrench: This is especially helpful for uncooperative or corroded drain fittings.

The plumber’s putty: This is a good sealer to use around the drain fitting to stop leaks.

Plumbing tape:  also referred to as Teflon tape, is used to seal threaded connections to provide a watertight barrier.

Pipe cutter or hacksaw: If, when installing the pipes, you need to change their length.


New Bathtub Drain Kit: Make sure the new bathtub drain kit comes with the stopper, gaskets, and drain fitting.

Plumbers Putty: As was already pointed out, plumber’s putty will be used to produce a tight fit.

Plumbing tape: is used to keep leaks from happening to thread connectors.

Rubber Gloves: Use rubber gloves to protect your hands from any possible chemicals and dirt.

Using these tools and materials at your disposal, you’ll be ready to take on the process of replacing a bathtub drain with ease. Recall that the secret to a successful do-it-yourself job is preparation.

Removing the Old Bathtub Drain

It’s important that you gently remove the old parts prior to installing a new bathtub drain. The next section provides a detailed procedure to guarantee a thorough and efficient removal:

Remove the Old Stopper and Linkage:

start by identifying and removing the screws or other fasteners that were securing the stopper. The device that connects the stopper to the drain, called the linkage, should be easily removable once it has been removed. Carefully remove the stopper and connector from the drain, taking care not to press anything.

Remove the Old Bathtub Drain Fitting: 

Carefully remove the bolts or screws holding the old drain cover or fitting in place with a screwdriver or wrench. You should be able to take the old fitting out of the drain after removing these. A small amount of cautious prying may be required in certain situations where the fitting is sealed with the plumber’s putty.

Clean the Tub Drain Opening: 

After removing the outdated parts, give the tub drain opening a thorough cleaning. Clear away any hair, debris, or filth that has accumulated over time. Maintaining a clean surface helps to avoid future obstructions and guarantees that the new drain components fit properly.

Determine the size of the Drain Thread:

Measure the thread size on your bathtub drain using a thread gauge or tape measure. To make sure the new drain fitting you’re installing will be a flawless fit, this is an essential step. One ½ and one ¼ inches are typical sizes.

Your new bathtub drain installation will go more smoothly if you take the time to carefully follow these instructions. Carefully removing old components helps prevent issues during the installation process and lays the groundwork for a successful update.

Installing the New Bathtub Drain

Let’s go on to install the new bathtub drain now that you have successfully removed the old parts. This section gives extensive instruction, making sure that every step is clear and short:

Step-by-Step Instructions:

Step 1: Apply Plumbers Putty

Putty the underside of the flange with a thin layer of the plumber’s putty before installing the new drain fitting. By sealing the crevices, this putty keeps water from leaking in.

Step 2: Place the New Drain Fitting in Place

Carefully slide the replacement drain fitting through the drain aperture. Make sure it fits the drain’s threads precisely and rests flush with the surface.

Step 3: Use a locknut to secure

Tighten the locknut to firmly anchor the drain fitting beneath the tub. An adjustable wrench can help to guarantee a tight fit. Take care not to overtighten as this could break the drain components or the tub.

Step 4: Put the stopper in place

If the manufacturer has included a stopper with your new drain kit, install it as directed. Usually, this entails attaching it to the linkage and using screws or other fasteners to hold it in place.

Step 5: Look for any leaks

After turning on the water, let the bathtub fill up. Make sure you keep a close check out for any leaks in the recently installed drain. Check the connections again and make sure everything is firmly fastened if you find any leaks.

Step 6: Adjustments (if necessary)

Adjust as necessary if the drain stopper or fitting is not performing as intended. To solve problems and fine-tune your device, refer to the manufacturer’s instructions.

You will be able to install your new bathtub drain with confidence if you follow these detailed instructions. Always refer to the detailed instructions that came with your drain kit, since manufacturer-specific differences can apply. You can enjoy a clean and effective bathtub one step closer with a well-placed drain.

Types of Bathtub Drain Stoppers

It is important to understand the many kinds of bathtub drain stoppers in order to choose the right replacement and maintain maximum performance. The following part gives information on the most popular kinds of drain stoppers:

Pop-Up Stoppers:

Description:  Pop-up stoppers are a common option that is frequently seen in contemporary bathtubs. They have a lever mechanism that is attached to a linkage beneath the bathtub. The stopper pops up and closes the drain when the lever is pulled when the stopper is pressed down.

Installation Tips: To guarantee smooth functioning, make sure the linkage is precisely linked and aligned before installing a pop-up stopper.

Lift-and-Turn Stoppers:

Description: Stoppers that are lifted and turned by hand are known as lift-and-turn stoppers. They are used to manually open or close drains. They give your bathtub a traditional appearance and are comparatively simple to install.

Installation Tips: To prevent problems with opening and shutting, make sure the threads of a lift-and-turn stopper are aligned correctly before installing it.

Toe-Touch Stoppers: 

Description: Activation involves applying pressure with your toe to the stopper. They provide a practical way to open and close the drain without using your hands. Newer tubs are often where you can find them.

Installation Tips: For optimal performance, make sure the toe-touch mechanism is firmly fastened to the linkage.

Trip Lever Stoppers:

Description: Essentially, these stoppers work by placing a lever on the tub’s overflow plate. To open or close the drain, simply move the lever up or down. This kind is frequently seen in older bathtubs.

Installation Tips: To ensure appropriate performance, make sure the trip lever stopper is correctly attached to the linkage before installing it.

Push-and-Pull Stoppers: 

Description: Using a basic push or pull mechanism, these stoppers allow the drain to be opened or closed. They are simple to use and aware of.

Installation Tips: To ensure smooth operation, make sure the push-and-pull mechanism is properly fastened.

Knowing what kind of drain stopper is in your bathtub and choosing a replacement that fits not only improves the appearance but also guarantees correct operation. For a hassle-free bathing experience, compatibility with the stopper type of your choice is essential when installing a new drain.

When to Call a Professional

It’s important to know when to hire a professional to help install a bathtub drain in certain situations. A qualified plumber will identify and repair any unexpected structural problems you may run into, such as leaky pipes or a wobbly bathtub foundation, protecting the strength and safety of your plumbing system. A plumber’s experience is also very helpful if your house has a complex plumbing system or if you’re not sure if the installation fits with local building codes. They can make sure that everything is installed according to the necessary standards and regulations.

It may also be right to call in a professional if there are continuous leaks, little expertise doing it yourself, or a tight deadline. With their ability to negotiate intricate plumbing configurations, locate leaks fast, and manage installations with ease, plumbers can provide a hassle-free solution that lets you enjoy your updated bathtub without needing an extensive amount of effort or time.

Important Warnings

It’s important to take the required safety precautions and be aware of any possible risks before beginning the installation of a new bathtub drain. Important cautions are outlined in this section to guarantee both your safety and the project’s success:

Electrical Safety: Make certain that any wiring or outlets close to the bathtub are covered or turned off to avoid coming into touch with water. Be extremely cautious when near electrical components as water and electricity can be harmful when combined.

Chemical Exposure: Caution: Chemicals may be present in certain plumbing supplies and items used in bathtub drain installations. Use the proper safety equipment, such as gloves and safety glasses, to reduce skin contact and avoid irritating the eyes.

Ventilation: Take care to work in an environment with good ventilation. Numerous plumbing products release fumes that are dangerous to breathe in small areas. While working on the installation, open the doors and windows to ensure adequate air circulation.

Heavy Lifting: Caution: Parts of bathtub drains, particularly the tub itself, might be heavy. To avoid strain or injury, use safe lifting techniques and ask for assistance from others when necessary. Make sure there are no obstructions in the way to allow for safe mobility.

Sharp equipment: Caution: Plumbing projects always need the use of sharp equipment like screwdrivers and wrenches. Take care not to cut or hurt yourself. Organize and place instruments easily accessible to avoid mishaps when retrieving them.

Secure the Area: Caution: Take out anything that can get in the way of your movement before beginning the installation. A neat environment reduces the possibility of mishaps and facilitates a more seamless installation procedure.

Follow the manufacturer’s instructions: Make sure you always follow the manufacturer’s instructions that come with the replacement bathtub drain kit. If these instructions are not followed, there may be leaks, incorrect installation, or other problems. The finest resource for ensuring a successful endeavor is the manufacturer’s instructions.

Cut Off the Water Source: Turn off the bathtub’s water supply before starting the installation. This keeps water from spilling accidentally while the process is underway and frees you up to work on the drain without hindrance.

You may help ensure a safe and effective bathtub drain installation by paying attention to these cautions and implementing the required safety measures. To guarantee a seamless and incident-free project, put your health first and adhere to best practices.


Nicely done on making it through the bathtub drain installation process without a problem! You now have all the information you need to do this do-it-yourself task, which will improve the look and feel of your bathroom.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top